Hatteland-display HT C02HI (Compact Entry Level) Manual do Utilizador descarregar pdf (Página 21)

IND100210-18

General Installation Recommendations

Installation

Internal Hard Drive (HDD) removal / replacement (Entry Level Models only)

Note: Areas of interest are marked in this section with circles and arrows in RED color. Please disconnect ALL

cables from the computer unit and HDD’s before proceeding!

1: Unscrew 4 screws on each side of the PCI bracket.

Use a Pozidriv #2 screwdriver.

2: Push each side of the bracket, one forward and one

backwards in a 45 degree rotation clockwise to slide it out

of the tracks. Then lift up the the bracket to remove it.

3: Disconnect any cables that are connected to the

HDD’s. Unscrew 4 screws on each side holding the

HDD bracket housing at the bottom of the cabinet.

4: Lift the HDD bracket housing up. Then, depending of

HDD installed or beeing installed, unscrew 4 screws (2

on each side for each HDD) to detach the HDD from the

bracket housing. Use a Pozidriv #2 screwdriver.

Repeat the procedure backwards to nalize operation.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 85 86

Sem comentários

Hatteland-display HT C02HI (Compact Entry Level) Manual do Utilizador Página 21